Aluminium Partition Work in Coimbatore
Quick, clean, termite-proof cabins and dividers built from aluminium sections with glass or board infill.
An aluminium partition is a non-load-bearing room divider built from extruded aluminium sections with infill panels of glass, prelaminated board or ACP, used to create cabins, offices and enclosures quickly without masonry. Cladex Elevations designs and installs aluminium partitions for offices, shops, factories and hospitals in Coimbatore, Tamil Nadu and Kerala.
An aluminium partition is a lightweight, non-load-bearing wall made from extruded aluminium sections that form a frame, filled with panels of glass, prelaminated board, ACP or a combination. It is used to divide a space into cabins, offices, stores or enclosures without building brick walls. Because the sections are cut and assembled on site with screws and cleats, a partition can be put up quickly with very little dust or wet work, and can be modified later.
Aluminium partition work is one of our core services, and it is one of the most practical ways to organise a working space in Coimbatore's offices, textile and engineering units, showrooms and clinics. Common layouts are half-glass, half-board cabins for managers, fully glazed meeting rooms, store rooms with solid infill, and supervisor cabins on factory floors with a clear view of the shop floor.
A good partition is straight, plumb, rattle-free and has doors that close properly for years. That depends on choosing the right section series for the height and span, fixing it firmly to floor, ceiling and walls, and using decent door hardware. Our engineers plan the layout with you, including door positions, electrical and data points and ventilation, before fabrication, so the finished cabins work for the people using them every day.
Why choose aluminium partition
Fast to install
Partitions are assembled from pre-made sections on site, so a cabin can be ready far sooner than a brick-and-plaster wall.
Clean, dry work
There is no masonry, plastering or curing, so offices and shops can often keep working nearby during installation.
Termite and water resistant
Aluminium does not rot, swell or attract termites, unlike timber frames, which matters in humid Kerala and coastal areas.
Flexible layouts
Mix glass and board infill to balance privacy and light, and add doors, sliding windows or louvres wherever needed.
Can be modified later
Panels and sections can be unbolted and reconfigured when a team grows or a floor layout changes.
Neat finish
Anodised or powder-coated sections stay presentable with occasional wiping and need no repainting.
Options & technical details
Typical choices we discuss with clients. The final specification is fixed after a site visit.
| Section series | Commonly 2.5-inch and 4-inch partition sections, chosen by height and span |
|---|---|
| Section finish | Anodised (silver, bronze, black) or powder-coated in standard colours |
| Glass infill | Plain, frosted or tinted glass; toughened glass recommended for low-level and large panels |
| Board infill | Prelaminated particle board, ACP or similar boards in a range of colours |
| Doors | Aluminium-framed doors with glass or board infill, handles, locks and door closers |
| Add-ons | Sliding windows, louvres, venetian blinds, frosted films and cable routing |
| Heights | Half-height, full-height to false ceiling, or full-height to slab |
Aluminium Partition, explained in drawings
How we plan and install an aluminium partition
We start by measuring the space and discussing how it will be used: who sits where, how many doors are needed, where switches, sockets and data points should go, and whether the cabin needs its own AC or shares the room's air. Based on this we fix the layout, the height, the section series and the mix of glass and board infill.
On site, floor and ceiling tracks are set out with a laser or line, and the vertical sections are fixed firmly into the floor, walls and slab or ceiling grid. Horizontal members, infill panels, beadings and doors follow. A partition that wobbles or has a door that drags is almost always the result of weak fixings or wrong section size, so we pay particular attention to both.
Aluminium partition vs gypsum partition vs frameless glass
Gypsum board partitions give a smooth, paintable wall and better sound insulation when built with insulation in the cavity, but they need jointing, finishing and painting, and they do not like moisture. Frameless glass partitions in 10-12 mm toughened glass look premium and very open, but cost more and offer little privacy without film.
Aluminium partitions sit in between: quick, durable, moisture-tolerant and affordable, with the option to mix glass and board for privacy and light. They are the practical choice for factory offices, shops, clinics and growing businesses that may need to change the layout later.
What affects the cost of aluminium partition work
Cost is mainly driven by the total running length and height, the section series and its weight, and the finish, since powder-coated colours and some anodised shades cost more than standard silver. The infill is the next factor: toughened or frosted glass, prelaminated board and ACP all differ in price, as do the number of doors and the quality of locks, handles and closers.
Extras such as sliding windows, blinds, frosted films, cut-outs for switches and AC ducts, and working at height or outside business hours also add to the total. Send us a rough sketch with dimensions or photos of the space on WhatsApp and we will visit, measure and send a free, detailed quotation.
Aluminium Partition: questions answered
What is the price of aluminium partition work in Coimbatore?
Aluminium partition price depends on the running length and height, the section series and finish, the infill (glass, prelaminated board or ACP), the number and type of doors, the hardware, and extras like sliding windows, blinds and electrical cut-outs. Cladex visits your site in Coimbatore, measures the space and shares a free, itemised quote on WhatsApp.
Which aluminium section is used for partitions?
Partitions in India are commonly built with 2.5-inch or 4-inch aluminium partition section series. The 4-inch series is stiffer and suits taller, full-height partitions and longer spans, while the 2.5-inch series is used for lower and lighter partitions. The section weight, wall thickness and finish should be stated clearly in the quotation.
Is aluminium partition better than a brick wall for an office?
For dividing an office into cabins, aluminium partitions are usually faster, cleaner and lighter than brick walls, and can be reconfigured later. They let you combine glass and board for light and privacy. A brick wall gives better sound insulation and fire resistance, so it remains the better choice for boundaries that need those properties, such as walls between tenancies.
Can I combine glass and board in an aluminium partition?
Yes, and this is the most common style. A typical cabin has board infill up to desk height for privacy and to hide cables, with glass above for light and visibility. Frosted glass or film can be used at seated eye level for extra privacy. The combination can be adjusted panel by panel to suit each room.
How long does aluminium partition work take?
The time depends on the running length, height, number of doors and windows, and whether materials such as a particular board colour or glass finish need to be ordered. Because aluminium partitions are assembled dry from cut sections, they are generally much quicker than masonry walls. We share a realistic schedule along with the quotation after measuring the site.
Are aluminium partitions soundproof?
Standard single-glazed aluminium partitions reduce noise but are not soundproof, because thin glass and board and small gaps let sound through. Sound privacy improves with thicker or laminated glass, solid infill panels with insulation, good seals around doors, and taking the partition up to the slab instead of stopping at a false ceiling. Tell us your privacy needs and we will advise.
What finishes are available for aluminium partition sections?
Aluminium partition sections are usually anodised, in silver, bronze or black, or powder-coated in a wide range of colours, including white, grey and wood-effect options. Anodising is hard-wearing and holds up well to cleaning, while powder coating offers more colour choice to match office interiors. Both need only occasional wiping.
Planning aluminium partition?
Share your building details. Our engineers will suggest the right specification and send a measured quotation.
Aluminium Partition near you
Aluminium Partition quote
Send us your details. Your enquiry opens in WhatsApp and goes straight to our engineers.
Often combined with
Office Glass Partitions
Glass office partitions are interior walls made mainly of toughened glass, either frameless in slim floor and ceiling channels or held in slim aluminium frames, used to create cabins and meeting rooms that keep an office bright and open. Cladex Elevations installs glass office partitions in Coimbatore, Tamil Nadu and Kerala.
Explore Toughened GlassToughened Glass
Toughened glass, also called tempered glass, is safety glass that has been heated and rapidly cooled so it is roughly four to five times stronger than ordinary annealed glass of the same thickness and breaks into small, blunt pieces. Cladex Elevations supplies and installs toughened glass doors, shopfronts, partitions and facades in Tamil Nadu and Kerala.
Explore CeilingsSoffit Ceiling
A soffit ceiling is the finished ceiling on the exposed underside of a building element such as a roof overhang, entrance canopy, porch, balcony or projecting floor, usually made of ACP or aluminium panels where it is exposed to weather. Cladex Elevations designs and installs soffit ceilings in Tamil Nadu and Kerala.
ExploreSources & standards
Technical statements on this page follow Indian standards and established industry references. Always confirm project-specific requirements with your architect or structural consultant.
- IS 16231 (Part 4):2019 Use of Glass in Buildings — Safety Related to Human Impact · Bureau of Indian Standards (Public.Resource.Org copy, Internet Archive)Indian code on safety glass in human-impact locations: doors, low panels, partitions, bathrooms and balustrades.
- IS 1868:1996 Anodic Coatings on Aluminium and its Alloys · Bureau of Indian Standards (Public.Resource.Org copy)Indian standard for anodised finishes on aluminium sections used in partitions and ceilings.
- IS 2553 (Part 1):2018 Safety Glass — Specification, Part 1: Architectural, Building and General Uses · Bureau of Indian Standards (Public.Resource.Org copy, Internet Archive)Indian specification for toughened and laminated safety glass, incl. nickel-sulphide spontaneous-breakage annex.
- National Building Code of India 2016 (Volume 1) · Bureau of Indian Standards (Public.Resource.Org copy, Internet Archive)Full text of NBC 2016 Vol. 1, incl. Part 4 fire & life safety (glass facades) and Part 6 Section 8 Glass and Glazing.
Planning a new facade or a makeover?
Talk directly to our engineers. Send photos or a drawing on WhatsApp and get practical options for your building.